We have the below listed latches available:
- Replacement RV Emergency Window Latch Set # 37281925 (only red option)
- Replacement Hehr-Style Window Latch for Double Pane Windows # 37220435
- Sash Window Latch # 37211725
- Replacement RV Window Latch # 37281875
Unfortunately, your RV information does not provide me anything about your windows and window latches. If the above latches do not look similar, please send me a picture of what you currently have and I would be happy to look... view full answer...
It sounds like you're looking for a replacement window crank and knob for your 2005 Bantam Flyer.
We do carry some replacement RV window parts, like the JR Products Window Knob # 37220355 for a 1/2 inch shaft or # 37220345 for a 1 inch shaft. We also carry a few different window cranks in both metal and plastic like # 37220265 and # 37220205. If you're looking to replace the main driver arms, you can try a local hardware store or an RV or trailer parts store, as that we do not carry.
I've... view full answer...
There are not complete kits, but all that is needed for a complete window awning is the projection window awning roller and the awning support arms.
For example, the Solera 18" Projection Window Awning Roller - 36" Wide # LCV000334778 would require the Solera 18" Projection Window Awning Support Arms for RVs # LCV000334754.
I have added a link to our entire selection of window awnings and support arms for you to check out. view full answer...
For an awning for a 48 inch wide window using 18 inch arms we have a few options like the Solera part # LCV000334964 which has a white to black fade or the part # LCV000335004 which has a black to white fade. view full answer...
That's a great question.
If you are going to get the Solera XL RV Window Awning Fabric and Roller - 66" Wide - 30" Projection - Sand Fade
# LCV000335369 you will need the Solera XL Window Awning Support Arms for RVs with 32" For Taller Windows - Black # LCV000334764.
The support arms will come with their own hardware you need to install them.
This unit does act like a standard manual awning and it does have tension on both arms. It has a pull strap that you will use to open the window... view full answer...
Depending on the window style and size. I would suggest either the Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 1/2" Tall # SR43FR or the Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 3/4" Tall # SR63FR. view full answer...
The Solera 18" Projection Window Awning Roller part # LCV000334978 does come with the awning rail but you will still need the Solera 18" Projection Window Awning Support Arms for RVs part # LCV000334750 and the White Butyl Tape part # CAM25013 in order to complete your install. view full answer...
We have an option that is close, which is an entry door window kit that has a frame, glass window and shade. The shade measures 11-7/8" x 21-1/2", and the frame will fit an entry door cut out that measures 15" wide x 24" tall. The doors must also be between 1-1/2" to 2" thick. If these dimensions work for you, the correct part is the following:
- Lippert Thin Shade Complete Window Kit # LC806621 view full answer...
The spacing from center to center on the top and bottom of the Valterra Replacement Window Frame for RV Entry Doors # A77009 is 4-5/16" apart and the center to center spacing on the sides is 6-15/16" apart. view full answer...
Yes, you can use the Replacement RV Entrance Door Glass # VAL58GR to replace the glass of your Lippert Thin Shade Complete Window Kit # LC806621. If you need to replace the window frame as well you can use part # A77008. view full answer...
I have another option for you, but the Camco RV Vinyl Trim Insert # CAM25202 is not for windows, entry doors, compartment doors, or vents.
We have a few window weather strips available which I have listed below so you can see what size works for you.
-Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 1/2" Tall # SR43FR
-Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 3/4" Tall # SR63FR
-Rubber Outer Window Weather Strip for RVs - Press In - 15' x 5/8"... view full answer...
I may be able to help you find a suitable replacement ladder for your 2005 Keystone Montana 328RLS 5th wheel camper. We have the Surco Universal Exterior RV Ladder # SP501L that has a length of 97" and the Stromberg Carlson RV Exterior Ladder # LA-401BA that has a length of 99-1/2". Both ladders have a 250lb weight capacity.
Currently we do not carry windows. I find it easiest to contact a local custom window builder to have the components that are damaged with your window replaced rather... view full answer...
It depends on the part. For example, the Valterra frame and glass you were looking at, part # A77051, does not include the seal. It's just the frame, glass, and mounting hardware.
On the other hand, part # LC363370 from Lippert is the frame, glass, and seal but no hardware is included.
Both parts I referenced are 12 by 21 inch glass. view full answer...
I have a couple products linked for you that will fit your requirements:
**Solera XL RV Window Awning Fabric and Roller - 60" Wide - 30" Projection - Black Fade # LCV000369589.
**Solera XL RV Window Awning Fabric and Roller - 54" Wide - 30" Projection - Black Fade # LCV000396769.
**Solera XL Window Awning Support Arms for RVs with 32" or Taller Windows - Black # LCV000334764.
We do not carry Dometic awnings. However, we do have the Solera XL RV window awnings that will work great.
I... view full answer...
Our closest options for the seals you have pictured are part # SR43FR and # SR63FR. You'll want to take a quick measurement of the seals you have to ensure that these will match up and properly seal your windows. I've attached pictures of their dimensions below. view full answer...
Possibly; we have replacement window cranks for RVs but have no idea whatsoever what cranks are in a 2001 motorhome. The available window cranks are as follows, with the lengths being the shafts:
- 1": Window Crank # 37220205
- 1-3/8": Window Crank # 37220215
- 1-3/4": Window Crank # 37220225 view full answer...
We do not have any window unit style of RV AC units. All of the options we have are for the roof of the RV like with the Advent Air # ACM135CH. Due to passing vehicles it wouldn't be advisable to try and mount a window unit style AC in an RV. view full answer...
The Lippert Thin Shade Window Shade # LC786037 is only designed to fit on RV doors with a Thin Shade ready window on them, but as long as you've got a door with that window on it it does not require any holes to be drilled. I've attached a photo of what you should look for on your existing RV door to determine if this will work for you or not.
If your RV door is not Thin Shade ready and you have a door with a window cutout 15" wide x 24" tall you can replace your existing window with... view full answer...
There are 15-3/4" by 25" RV window door frames with glass, but they do each come with frosted glass, the Valterra Entry Door Window Frame Assembly - Black # A77051, and Lippert Components Replacement Window Frame with Seal for RV Entry Doors - White # LC363369 or Black # LC363370.
The only option we offer are window frames of that size which would require you to purchase the glass separately for the 12" x 21" window, though you'd need to source that locally as that glass is not something... view full answer...
The Solera XL RV Window Awning Fabric and Roller, # LCV000369589 pairs with XL support arms # LCV000334764 that are sold separately to create a window awning for your RV. This fits windows 54" to 59" wide and 32" or taller.
The awning arm, # LCV000334764 connects to the awning, # LCV000369589 and then mounts to the RV with button head screws. view full answer...
Go To Results